ATTENTION: You MUST HAVE one working remote to add one
more to the system. If you do not have one working remote right
now then these instructions will not work. You will have to have
a Locksmith or dealership use a computer to program the first
remote for you.

1. Turn the ignition switch to the ON/RUN position.
    
2. Using a previously programmed transmitter, press the
     UNLOCK button for 5 to 10 seconds. While the UNLOCK
     button is being pressed (after 5 seconds), press the
     PANIC button and release both buttons simultaneously.
     You will hear a chime sound to signal you that programming
     on the transmitter(s) may occur.

3. You may program up to 4 transmitters for your vehicle
     within a 30 second time limit. Press and release both
     LOCK and UNLOCK buttons of a new transmitter at the
     same time; then press and release any of the buttons
     once, you will hear a chime when the transmitter has
     been successfully programmed. A chime will sound
     when the 30 seconds is over, or if you turn the ignition
     switch OFF.

4. You must repeat step 3 for all new transmitters that
     will be used with this vehicle (up to 4 total).   

5. Turn the ignition OFF and remove key.

6. Test Remotes.