insert key into the ignition and turn to the on position. do not start the car.
Locate black wire coming from the trunk pull down assembly in trunk
Ground this wire....locks will cycle lock and unlock within a few seconds
to acknowledge programming mode
Press the unlock button on remote 1 twice within 20 seconds
Locks will cycle lock and unlock within a few seconds to acknowledge
programming
At this time press the unlock button on remote 2 twice within 20 seconds
Locks will cycle again to acknowledge programming
If you do not have 2 remotes use remote 1 two times.
Both procedures must be followed or you may cause your remote system
to become inoperable.
This entire procedure needs to be started within 30 seconds of grounding
wire or you will have to start all over.
