NOTE: All existing Keyless remote(s) will be erased with this procedure, and need to be reprogrammed.

1.      Locate the programming connector wire behind the plastic on the right hand side of the trunk. (will have a Black/White wire.)

2.      The programming connector wire should have one terminal in the Plastic connector on the end of the wire, ground this to a nearby bolt or the trunk latch.

3.      Lock system will now cycle to indicate programming mode has been activated.

4.      Press any button on your remote or remotes (locks will cycle).

5.      Disconnect ground wire to exit programming mode.

6.      Test your remotes.